Ftth Drop Cable
The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic.
The tubes are filled with a water-resistant filling compound.
The tube is wrapped with a layer of corrugated steel tape longitudinally. Between the corrugated
steel tape and the loose tube water-blocking material is applied to keep the cable compact
and watertight. Two parallel steel wires are placed at the two sides of the steel tape.
The cable is completed with PE sheath.
5. High Reliability and Stability
6. Stability Telecordia GR-1221 and GR-1209
The Planar Lightwave Circuit (PLC) splitter is an optical power management device manufactured using quartz optical waveguide technology. It has small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity and is widely used in PON networks for optical signal power distribution. Wolon offers a full range of 1×N splitters tailored to specific applications. All products meet CE and ROHS certification.
Description
Introduction
The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic.
The tubes are filled with a water-resistant filling compound.
The tube is wrapped with a layer of corrugated steel tape longitudinally. Between the corrugated
steel tape and the loose tube water-blocking material is applied to keep the cable compact
and watertight. Two parallel steel wires are placed at the two sides of the steel tape.
The cable is completed with PE sheath.
Feature
· Good mechanical and temperature performance
· High strength loose tube that is hydrolysis resistant
· Special tube filling compound ensure a critical protection of fiber
· Crush resistance and flexibility
· Two parallel steel wires ensure tensile strength
· Small diameter, light weight and friendly installation
Specification
|
There are 1xn or 2xn series for your choice, and all kinds of fiber connector like sc, st, fc, lc and so on for your choices.
About FTTH Drop Cable
FTTH drop cable contains 1 to 4 colored singlemode optical fibers with 250 µm individually, which provides a good solution for fiber to the home last mile solution.
The cable contains two Fibre Reinforced Plastic (FRP) strength members and Low Smoke Zero Halogen (LSZH) jacket with nominal dimension 2 x 3 mm.
They are fully meet the RoHS standards.
With its small diameter, light weight and special structure, it is easy to use, to handle and to pull the fibers out from the cables.
It is an ideal option for direct installation into the houses.
What is FTTH drop cable?
Leather cable is commonly known as indoor suspension wiring cable. With the domestic optical fiber access market showing a good momentum of development, optical fiber access has become a hot spot in the field of optical communication. In the optical fiber access project, the indoor wiring close to the user is the most complicated link. The bending performance and tensile performance of conventional indoor optical cables can no longer meet the needs of FTTH (fiber-to-the-home) indoor wiring.
The dish-shaped lead-in optical cable for access network (for indoor wiring) is to place the optical communication unit (optical fiber) in the center, place two parallel non-metallic reinforcements (FRP) or metal reinforcements on both sides, and finally extrude black or colored polyester Vinyl chloride (PVC) or low-smoke halogen-free material (LSZH, low-smoke, halogen-free, flame retardant) sheath.
What are the characteristics of FTTP Drop Cable?
Special bend-resistant optical fiber provides greater bandwidth and enhances network transmission performance;
Two parallel FRP or metal strength members make the optical cable have good compression performance and protect the optical fiber;
The optical cable has simple structure, light weight and strong practicability;
Unique groove design, easy to peel off, convenient to connect, simplify installation and maintenance;
Low-smoke halogen-free flame-retardant polyethylene sheath or flame-retardant PVC sheath, environmental protection.
It can be matched with a variety of field connectors and can be terminated on site.
Leather cable is widely used in access network because of its softness and lightness; the scientific name of leather cable is: butterfly-shaped lead-in cable for access network; because its shape is butterfly-shaped; so it is also called butterfly cable, Figure 8 optical cable
On the one hand, plastic blister bag package is preferred by European customers, because it can protect the plc splitters from crashing and keep goods well during transportation; or for dealers, the fine plastic blister bags will be liked by the end user.
On the other hand, if you prefer a cheaper shipping cost, and the plc splitters are used for project, the PE poly bag is a good choice.
Certificates
Wolon is a strict and professional production company, which obtain certificates like ISO9001, Patent certificate, Computer Software Copyright Registration Certificate, CE and RoHS, the quality is guaranteed.
Factory
Welcome to visit our factory, it is our honor to guide you visiting our factory and meet your industrial standard, get your satisfaction.
Exhibition
Wolon is Open to the market domestic and abroad, where there is a telecom communication, it is likely for you to see wolon company.
Hot Tags: ftth drop cable, China ftth drop cable suppliers, manufacturers, factory
