Epon OLT 8 Port
E9004-08-B/B complies with ITU-T G.984/G.988 and meets requirements about GPON OLT in Network Access Technical Requirements. It fully supports CTC2.0, automatic discovery and cooperation with ONUs of different manufacturers.
Description
Epon OLT 8port
E9004-08-B/B complies with ITU-T G.984/G.988 and meets requirements about GPON OLT in Network Access Technical Requirements. It fully supports CTC2.0, automatic discovery and cooperation with ONUs of different manufacturers.
E9004-08-B/B supports the Asymmetric uplink 1.25Gbps/downlink 2.5Gbps PON transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide reliable services to their users.
Its supports maximum splitter ratio 1:128, and its support of different hybrid ONU networks minimize the carrier’s investment.
E9004 based on the edge-cutting technologies, is strong in functions. A few of its functions such as QoS guarantee, SLA and DBA can be easily listed out.
Features:
● GPON: Abiding by ITU-T G.984/G.988, BDCOM GP3600 series OLT meets relevant requirements of GPON OLT regulated in Network Access Technical Requirements and China Telecom GPON Technical Requirements CTC2.0;
● System Capacity: supports 8 GPON ports.
● Uplink Interface: 4 gigabit SFP ports, 4 gigabit combo ports and 4 10GE SFP+ ports.
● Dimensions: 1U, occupies a small space.
● Environmental Protection: low power consumption and low operating cost.
● Bus Optical Fiber Protection: the link can be automatically switched when trouble occurs in the optical fiber;
● Power Characteristics: supports dual-AC, dual-DC and AC/DC power supply. The power supply supports modularized design, hot-swap and EMC-3 standard. It well adapts to the environment.
Technical Parameters
Parameter | Specification | |
System Capacity | Maximum coupling ratio:1:128 Backplane bandwidth:205G MAC table capacity: 64K | |
Interface | PON | 8 |
Uplink interface | 8 GE ports (4 gigabit SFP ports, 4 gigabit TX/SFP combo ports) | |
| 4 10GE SFP+ ports | ||
Attributes of the PON Interface | The transmission rate with downlink 2.5Gbps/uplink 1.25Gbps Class B+ and Class C+ GPON module Security: ONU authentication mechanism | |
Standards | ITU-T G.984/G.988,IEEE 802.1D, Spanning Tree,IEEE 802.1Q, VLAN,IEEE 802.1w, RSTP IEEE 802.3ad physical link static/dynamic aggregation (LACP) Ethernet – II | |
QoS | Backpressure flow control (half duplex) IEEE 802.3x flow control (full duplex), IEEE 802.1p, CoS WRR, SP and FIFO queue schedule Limiting the uplink/downlink rate based on each ONU DBA and SLA | |
VLAN | Port-based VLAN, 4K VLAN QinQ and flexible QinQ | |
Multicast | L2 Multicast,IGMP Snooping,MLD Snooping | |
Reliability | Unidirectional Link Detection (UDLD) Hot swap of the GPON optical module Optical path protection of GPON (type B/C, hand-in-hand) Abnormal luminescence ONU detection such as long luminescence | |
Network Security | Limiting the maximum number of users on each port Port isolation,Packet storm control Flow-based ACL access control function Transmission data encryption on the PON interface | |
Configuration Management | Various management modes such as CLI, SNMP and TELNET Conducting software upgrade through TFTP Debug output | |
Physical Characteristics | Dimensions mm (W×D×H): 442.5x304x 44 | |
Installation: standard 19-inch rack-mounted | ||
Weight:5.25Kg | ||
Environment | Operating environment: 0℃-45℃; 10%-85% non-condensing | |
| Storage environment: -40℃-80℃; 5%-95% non-condensing | ||
Power Supply | Input voltage: AC90 ~ 240V, DC 36 ~ 72V dual-power input, DC/AC power supply and hot-swap | |
Package
Packaging | |
Size | 175mm (L) * 442mm(W) * 44mm (D) |
Weight | 2.5kg |
Packaging Details | The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request. |
FAQ:
Q1: Are you a manufacture ? do you have a engineer team to offer us a technology support for update software ?
A: Yes. we have a 30 engineers . we usually can have a online meeting to offer our terminal customer technology support.
Q2: What’s application of OLT?
A: it used for FTTH solution project , domestic usage , office space usage ....
Q3. Can you offer OEM service and use our logo?
A: Yes. We can offer you ODM and OEM service and we can customized your logo for all the products.
Q4. What’s the MOQ of our gpon OLT？
A: 10pc . for samples order, no MOQ.
Q5: How about warranty?
A: 3years’ warranty time.
Q6: What about delivery time?
A: Small orders within 10days, mess order about 25-30days.
Q7: What’s about the service schedule aftersales ？
A：frist you must approved it is our quality issue, we will exchange the bad one for you from your next order or return your money.
Q8：How do you update the software for our gpon olt?
A: we have a service center online. Any required , you can connect with us online.
Hot Tags: epon olt 8 port, China epon olt 8 port suppliers, manufacturers, factory, Epon Olt 16 Port, Epon Olt 4 Port, EPON OLT, Epon Olt 8 Port
