Epon Onu 1GE
HTR5101E is designed as HGU (Home Gateway Unit) in deferent FTTH solutions,The carrier-class FTTH application provides data service access.
Description
1. Overview
■ HTR5101E is designed as HGU (Home Gateway Unit) in deferent FTTH solutions,The carrier-class FTTH application provides data service access.
■ HTR5101E is based on mature and stable, cost-effective EPON technology.
■ HTR5101E adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0
2. Functional Feature
■ Support EPON mode
■ Support ONU auto-discovery/Link detection/remote upgrade of software
■ Support Route PPPoE/IPoE/Static IP and Bridge mode
■ Support IPv4/IPv6 dual mode
■ Support Firewall function and IGMP multicast feature
■ Support LAN IP and DHCP Server configuration
■ Support Port Forwarding and Loop-Detect
■ Specialized design for system breakdown prevention to maintain stable system
3. 3.Hardware Specification
Technical item | Details |
PON Interface | 1 EPON BOB（PX20+/PX20++）） |
Receiving sensitivity: ≤-27dBm/≤-28dBm | |
Transmitting optical power: 0~+4dBm/+2~+7dBm | |
Transmission distance: 20KM | |
Wavelength | TX: 1310nm, RX: 1490nm |
Optical Interface | SC/UPC Connector |
Chip Spec | RTL9601D ,CPU 300MHz,DDR2 32MB |
Flash | SPI Nor Flash 8MB |
LAN Interface | 1x 10/100/1000Mbps auto adaptive Ethernet interface. RJ45 connector |
LED | 4 LED, For Status of PWR、LOS、PON、LINK/ACT |
Push-Button | 2,For Function of Power on/off,Reset |
Operating Condition | Temperature: 0℃~+50℃ |
| Humidity: 10%～90%（non-condensing） | |
Storing Condition | Temperature: -30℃~+60℃ |
| Humidity: 10%~90%（non-condensing） | |
Power Supply | DC 12V/0.5A |
Power Consumption | <3W |
Dimension | 120mmx78mmx30mm(L×W×H) |
Net Weight | 0.13Kg |
4. Panel lights Introduction
Pilot | Status | Description |
PWR | On | The device is powered up. |
Off | The device is powered down. | |
PON | On | The device has registered to the PON system. |
Blink | The device is registering the PON system. | |
Off | The device registration is incorrect. | |
LOS | Blink | The device doses not receive optical signals. |
Off | The device has received optical signal. | |
LINK/ACT | On | Port is connected properly (LINK). |
Blink | Port is sending or/and receiving data (ACT). | |
Off | Port connection exception or not connected. |
5.Product Appearance
6. Application
■ Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
■ Typical Business：INTERNET、IPTV etc
Hot Tags: epon onu 1ge, China epon onu 1ge suppliers, manufacturers, factory, EPON ONU, Epon Onu 1ge 3fe wifi, Epon Onu 1ge 1fe wifi, Epon Onu 1ge
