1x4 Plc Splitter Upc
video
1x4 Plc Splitter Upc

1x4 Plc Splitter Upc

1. Low Insertion loss and Low PDL
2. Good channel-to-channel uniformity
3. Wide Operating Wavelength: From 1260nm to 1650nm
4. Wide Operating Temperature: From -40℃ to 85℃
5. High Reliability and Stability 6. Stability Telecordia GR-1221 and GR-1209
The Planar Lightwave Circuit (PLC) splitter is an optical power management device manufactured using quartz optical waveguide technology. It has small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity and is widely used in PON networks for optical signal power distribution. Wolon offers a full range of 1×N splitters tailored to specific applications. All products meet CE and ROHS certification.

Send Inquiry
Add To Inquiry
Description
Description

 

Introduction

 

PLC splitter is based on a quartz substrate integrated waveguide optical power distribution device, has the advantages of small volume, the working wavelength range, high reliability, good light uniformity etc characteristic, is especially suitable for passive optical network ( EPON, BPON, GPON etc ) connected local and terminal equipment and realize the optical signal devide.

 

Features

 

1. Low Insertion loss and Low PDL

2. Good channel-to-channel uniformity

3. Wide Operating Wavelength: From 1260nm to 1650nm

4. Wide Operating Temperature: From -40℃ to 85℃

5. High Reliability and Stability

6. Stability Telecordia GR-1221 and GR-1209

 

 

Specification (with no connector)

 

Parameter

Unit

Specification (P Grade)

Operation Wavelength

nm

1260~1650

Channel Number

 

1X2

1x3

1X4

1x6

1X8

1x12

1X16

1x24

1X32

1X64

1x128

Insertion Loss(Max)

dB

4.3

6.2

7.2

9.8

10.5

12.5

13.6

16.5

17.2

21.0

25.5

Uniformity (Max.)

dB

0.5

0.6

0. 6

0.8

1.0

1.0

1.4

1.5

1.6

2.0

2.5

Polarization Dependent Loss

dB

0.2

0.3

0.3

0.3

0.3

0.3

0.3

0.3

0.3

0.5

0.8

Return Loss

dB

≥55

Directivity

dB

≥55

 

Parameter

Unit

Specification (P Grade)

Operation Wavelength

nm

1260~1650

Channel Number

 

2X2

2X4

2X8

2X16

2X32

2X64

2x128

Insertion Loss (Max.)

dB

4.5

7.5

11.2

14.6

17.5

21.5

25.8

Uniformity (Max.)

dB

0.8

1.0

1.2

1.5

1.8

2.5

3.0

Polarization Dependent Loss

dB

0.2

0.3

0.3

0.3

0.3

0.5

1.0

Return Loss

dB

≥55/50

Directivity

dB

≥55

Note: UPC Connectors: IL add 0.2 dB, APC Connectors: IL add 0.3 dB.

 

Can the splitter be changed at will?

 

The splitter can be changed at will. A splitter is a component of a PON network, a passive device that connects OLT and ONU. Its function is to distribute downlink data and concentrate uplink data.

 

The splitter comes with one uplink optical interface and several downlink optical interfaces. The optical signal from the uplink optical interface is assigned to all the downlink optical interfaces for transmission, and the optical signal from the downlink optical interface is assigned to the only uplink optical interface for transmission. Splitter principle of operation in the single-mode fiber transmission of optical signals, light energy is not entirely concentrated in the core of the propagation, there is a small amount is through the core of the cladding propagation, that is, in the two fiber cores are close enough, the mode field of the light transmitted in one fiber can enter the other fiber, the optical signal in the two fibers to be redistributed.

 

Home fiber can use splitter

 

Home optical fiber can use splitter, but it is not necessary, because the splitter are used in the fiber box, the role of the following chart: splitter use environment as follows:

 

1. Splitter application environment requirements for the use of environment: -30 ~ 65 ℃, RH 5-95%

 

2. If the product is used outdoors such as sewer/outdoor chassis, it needs to be mold, avoid direct sunlight, too humid, or too close to other heat sources, and some areas also need to prevent salt spray, etc.

 

3. The best fiber optic plus other protective measures to prevent rodent bites.

 

 

 

lgx splitter packaging

On the one hand, plastic blister bag package is preferred by European customers, because it can protect the plc splitters from crashing and keep goods well during transportation; or for dealers, the fine plastic blister bags will be liked by the end user.

 

On the other hand, if you prefer a cheaper shipping cost, and the plc splitters are used for project, the PE poly bag is a good choice.

 

 

Certificates

 

 

Wolon is a strict and professional production company, which obtain certificates like ISO9001, Patent certificate, Computer Software Copyright Registration Certificate, CE and RoHS, the quality is guaranteed.

ISO 2020-2023

Mini PLC Splitter CE RoHS 2

Factory

 

Welcome to visit our factory, it is our honor to guide you visiting our factory and meet your industrial standard, get your satisfaction.

Factory

 

Exhibition

 

Wolon is Open to the market domestic and abroad, where there is a telecom communication, it is likely for you to see wolon company.

Exhibitions.jpg

Hot Tags: 1x4 plc splitter upc, China 1x4 plc splitter upc suppliers, manufacturers, factory

(0/10)

clearall