Plc Splitter Without Connector

Description

 

Blockless/Mini module PLC (Planar Lightwave Circuit) splitter is a type of optical power management device with mini module package fabricated using silica optical waveguide technology. It is widely used in PON/ODN networks to realize optical signal power splitting with 1xN or 2xN splitting ratio. Wolon provides a series of customized mini module PLC splitters to meet different requirements on port configuration, cable type, fiber length, input connector, and output connector.

 

Specifications (1XN):

 

Parameters	1×2	1×4	1x8	1×16	1×32	1×64	1×128
Operating wavelength	1260 ~1650nm
Insertion Loss (dB)(P/S Grade)	3.6/4.0	7.2/7.4	10.2/10.5	13.5/13.7	16.2/16.7	20.5/21	23.8/24.5
uniformity (dB)	0.4	0.6	0.8	1.0	1.2	1.8	2.0
PDL (dB)	0.2	0.2	0.3	0.3	0.3	0.4	0.5
Return Loss (dB)	≥55
Directivity (dB)	≥55
TDL(dB)	0.5
Operating/Storage Temperature (℃)	-40~+85

 

Specifications (2XN):

 

Parameters	2×2	2×4	2×8	2×16	2×32	2×64	2×128
Operating wavelength	1260 ~1650nm
Insertion Loss (dB)(P/S Grade)	3.8/4.2	7.5/7.8	10.7/11	14/14.2	17/17.5	21/21.5	25/25.5
uniformity (dB)	0.6	1.0	1.2	1.5	1.8	2.0	2.5
PDL (dB)	0.2	0.2	0.3	0.3	0.3	0.4	0.4
Return Loss (dB)	≥55
Directivity (dB)	≥55
TDL (dB)	0.5
Operating/Storage Temperature (℃)	-40~+85
Note: All the data above does not include connector

More specification for choice: 1*2 1*4 1*8 1*16 1*32* 1*64 1*128

Adaper choice: FC,SC,LC,ST , MPO

 

plc splitter without connector

 

 

 

 

Is the splitter in the optical handover box?

To be exact: the splitter can be placed in the optical box!

Optical delivery boxes, optical cable distribution boxes, optical cable terminal boxes, optical splitter boxes, all-in-one machines, etc., can be placed optical splitters.

Which optical splitter should be placed is specified by the engineering designer, and it is generally sure to be placed in the most reasonable place.

If you put it too far from the user's end, it will definitely waste materials and become multiple cores in one core.

It should be as far away from the user side as possible, but excessive concentration on the user side is not enough, which is extremely detrimental to maintenance and management.

The splitter is not used too much, the light attenuation is too large, and the terminal equipment is not good.

To give a simple example, the most common cell fiber-to-the-home construction now:

The bureau side gives 3 mouths (the bureau side is in short supply!) If you can save it), come out a 4-core optical cable (the optical cable does not have 3 cores), to cover a total of 300 users in a community (5 buildings, each building 2 door holes, 10 floors, 3 households per floor).

The optical cable route is as follows:

Telephone bureau - > front optical delivery box - > optical splitter box in the door hole of each building (10 boxes are required) - > users

The designer designed, put 3 beamsplitters in the optical delivery box in front of the community, two 1:4, one 1:2, 3 cores become 10 cores, give each building door hole 1 core, each building door hole in the optical splitter box each put a 1:32 splitter, out of 32 cores, each core to one household, save 2 cores for backup. OK!

Communication engineering is varied, and there are many types of designs, and what is needed is expertise. Where to put the beamsplitter depends on various site conditions. The example just given to you is the most common communication project at this stage, and now there are generally optical splitters in the optical box, which saves resources, is easy to maintain, and is conducive to management.

What is a PLC splitter?

PLC splitters are passive devices, also known as optical splitters, which do not require external energy, as long as there is input light. The splitter consists of incident and exit slits, mirrors and dispersive elements whose role is to separate the required resonance absorption lines. The key component of the splitter is the dispersion element, and commercial instruments now use gratings.

1) After the light enters the splitter, the ordinary light can be divided into the following three categories according to the wavelength:

Near ultraviolet (near UV): 200-380nm.

Vacuum ultraviolet (vacuumUV): 10-200nm.

Extreme UV, extreme UV: 1-10nm.

2) From the perspective of human health and environmental protection, it can also be divided into UVA (315~400nm), UVB (280~315nm), UVC (below 280nm).

3) Another classification method is single-mode, multi-mode.

Single mode: 1310nm. Multimode: 850nm.

There are three general interfaces for optical splitters, one is LC, one is FC, and the third is SC

How to connect home optical fiber to the splitter?

Ordinary optical fiber transceivers are point-to-point and cannot be connected to optical splitters. To use PON OLT/ONU to use point-to-multipoint, usually 1 OLT through the optical splitter connected to 16-64 ONU, downlink broadcast transmission, uplink ONU Burst Mode work, time-sharing multiplexing.

 

Optical splitters are passive devices, also known as optical splitters, they do not require external energy, as long as there is input light. The splitter consists of incident and exit slits, mirrors and dispersive elements whose role is to separate the required resonance absorption lines. The key component of the splitter is the dispersion element, and commercial instruments now use gratings. The large-scale use of leather wire optical cables in FTTX engineering mainly adopts two connection methods: one is the cold connection technology (physical connection) of optical cable based on cold splicers, and the other is the hot melt technology of welding machine as a tool.

 

 

Connector Choices

 

 

 

Application

 

 

Company Information

 

Wuhan Wolon Commnunication technology Co.,LTD. Is located in Optical Valley Wuhan China . it specializes in R & D, products and sales of PLC splitter,optical fiber cable, , patch cord, optical fiber distribution frame, optical module, optical cable cross connection cabinet and other FTTH products. With the great technology in optical research and production, wolon gathers a group of optical talents on fiber communication, which possess the rich experience of R & D and a strong capability of technology innovation. Our company has the world’s advanced equipment in producing, testing and packaging. Wolon has a strict quality control system in 2013. at the same time passed the ISO9001 certification and TLC certification.

To create the world’s leading brand communication products, Wolon always sets “ Quality first, Customer-Focused Purpose, Developing on Innovative Technology” as our company core values. We are sincerely looking forward to people at domestic and abroad to visit our factory and corporate with us. We will provide you best products and service.

Cooratetive Companies and Brand

 

 

Related Products

 

Here are some related products produced by our company, if you have the demand, you could click the below pictures for more details.

FAQ

 

Q: How could I get the quotaion?

A: Just write a inquiry with your demand details, in below messge dialog box, and send it .

Our seller will reply you in short time.

 

Q: What is you MOQ?

A: One piece is available .

 

Q:Can you provide the OEM service?

A: Sure, we have the complete production line, we could do the production as your request.

 

Q: Could I get a sample firstly?

A: Yes, We could provide you the sample for checking the quality of the products.

 

 

Hot Tags: 1x4 mini plc splitter, China, suppliers, manufacturers, factory, wholesale, Horizontal Splice Closure 48 Core, Cross Connection Cabinet 288 Core, Adss Optical Fiber Cable, Fiber Pigtail, Sfp 1.25g 1550nm 80km Duplex, Gyts Fiber Optic Cable

Hot Tags: 2x4 fiber optic plc splitter, China, suppliers, manufacturers, factory, wholesale, Horizontal Splice Closure, 1x2 Abs Box FBT Splitter, 1x8 Mini PLC Splitter, 8 Core Distribution Box, Otdr Fiber, Gpon Olt 16 Port

Hot Tags: plc splitter without connector, China plc splitter without connector suppliers, manufacturers, factory